What’s the Difference Between Sanding and N-Harmony Floor Restoration?

When you restore a floor, obviously you’re repairing a damaged floor to make it look as good as new. The difference can be in the way the floor is restored, if it’s from water damage, fire damage, or electrical and plumbing problems, and even water damage. So, what’s the main difference? Mainly floor refinishing requires an individual who knows the floor very well and understands how to restore it to the original look.

The first difference between floor refinishing and bare wood floor refinishing is the level of work involved. With bare wood floor refinishing, the entire floor is sanded with mineral spirits, sanded again, sealed, primped, and then painted. This can be a very tedious process because the wood has to be sanded, primed, sealed, sanded again, primed, and painted all at once.

On the other hand, floor restoration uses a roller to apply the stain. With this method, the floor is first wetted with mineral spirits to remove any excess moisture. A roller is then used to apply the stain with very light pressure, so that it’s very even and well spread throughout the floor. This allows for the floor to be treated with a solvent based stain, such as polyurethane, which is applied with a brush, piece by piece, using a uniform pressure. This process allows the floor to absorb the stain with strength and leaves it with few, if any, spots.

One of the biggest differences between floor refinishing and floor restoration is the cost. With floor refinishing, the entire floor needs to be replaced, whereas with floor restoration, just a few boards need to be replaced. Plus, with hardwood floor refinishing, you may even be able to perform the entire installation yourself if you’re up to the challenge. For those who are not as skilled at DIY, floor restoration is highly recommended.

Floor sanding and n-hance floor restoration are similar but require slightly different methods. With floor restoration, all the wood has to be removed from the frame, as well as all the flooring, floor joists, and siding. All of these items need to be weighed and repaired individually. The wood is then “sanded” to smooth out all the imperfections. The floor is then left to dry overnight, and the following day is sanded again. This process continues until the floor is free of imperfections.

With floor sanding, all the flooring is removed from the frame, as well as all the floor joists, siding, and floor tiles. These items need to be weighed and repaired individually. As with floor refinishing, floor sanding is done all over the floor until the floor is free of imperfections. Once the floor is sanded and restored, the floor-finishing process begins. This entails applying a finish to the floor, sanding it down again, sanding again, and applying a new finish to the floor once more. If You need the service of an expert hardwood floor refinishing in Jersey City just visit M&C Flooring LLC at New Jersey.